Help with remote + volume please =)

[lukeh]

i seemed to have misplaced the little booklet telling me what code i needed to enter so that my blue "shark" remote would control telly features (volume etc) please could someone post the Codes for Samsung tellys. i tried looking everywhere....but couldn't find any on the net

thanks

[Bob]

I have them uploaded on my webspace... http://homepage.ntlworld.com/richard...20codelist.gif

[lukeh]

thanks alot!

[Bob]

Could I ask that this maybe put into the Knowledgebase about STB info as this question seems to get asked quite alot

[Ramrod]

Originally Posted by Bob

I have them uploaded on my webspace... http://homepage.ntlworld.com/richard...20codelist.gif

How exactly do we use those?
..and which ones do what?

[Bob]

Well thats perhaps something that could be added to the Knowledgebase.

You would require a new shark remote in either navy/grey (depending on STB and area). I'll see whay I can do for you

[Ramrod]

Originally Posted by Bob

Well thats perhaps something that could be added to the Knowledgebase.

You would require a new shark remote in either navy/grey (depending on STB and area). I'll see whay I can do for you

I have a samsung remote in blue with rdc 002 written on the inside just below the batteries

[Bob]

Ok... I'll tell you what to do and then I'll make sure it is available for everyone in the future

Bloody hell... can't find mine now!

I'll let you know soon

[Ramrod]

Cheers m8. If it's any help the samsung is attached to a Sony CRT tv

[Bob]

Right!

1. Make sure that the STB volume is at 10!
2. Press the * key and the setting key and keep them held down for two seconds. The Standy-By button should flash green twice
3. Type in the three digit code for your TV and press the select/ok key
4. The Stand-By button should flash green twice acknowledging the code has been accepted
5. Test the remote by holding down the * and Stand-By key down and if your TV goes into Stand-By you have the correct code.
6. If this code hasn't worked try the other codes listed for you manufacturer by repeating steps 2-5 until step 6 has worked

Hope this has helped Ramrod

Yours is a Sony so you will need to try the following codes:

316, 319, 322, 365, 366, 367, 368, 369 or 370

[Ramrod]

Ermmmmm how do I get stb volume to 10? When I press vol on the blue samsung remote I just get a box on screen telling me to use the tv remote to adjust volume

[Bob]

Thats only necessary on Langley then, or it was with L2.9 software. Dunno whether or not it will be with L3.1

[Ramrod]

Originally Posted by Bob

Right!

1. Make sure that the STB volume is at 10!
2. Press the * key and the setting key and keep them held down for two seconds. The Standy-By button should flash green twice
3. Type in the three digit code for your TV and press the select/ok key
4. The Stand-By button should flash green twice acknowledging the code has been accepted
5. Test the remote by holding down the * and Stand-By key down and if your TV goes into Stand-By you have the correct code.
6. If this code hasn't worked try the other codes listed for you manufacturer by repeating steps 2-5 until step 6 has worked

Hope this has helped Ramrod

Yours is a Sony so you will need to try the following codes:

316, 319, 322, 365, 366, 367, 368, 369 or 370

Sorry about this m8 but pressing the * and settings key doesn't do anything

[Bob]

It should do. Make sure they are both held down together simultaneously for two seconds until that green light flashes

Just had to do it myself as the remote forgot the code - could have had something to do with the need for a change of batteries

[Ramrod]

Originally Posted by Bob

It should do. Make sure they are both held down together simultaneously for two seconds until that green light flashes

Nope.....this is on a samsung box innit?