To mark the launch of these forum's I am pleased to report that after 2 years of dodgy upstream power levels ntl have finally sorted out my upstream. And its all been done from the UBR end!
As my upstream had dropped into the 30s I've even put the 6dB attenuator(*) back in!
Code:
Terayon DOCSIS Cable Modem: HW 6.62; SW 1.7.6
System up time = 0 days 00h 20m 39.56s
Downstream channel ID = 0
Downstream channel frequency = 402750000 Hz
Downstream received signal power = 1.3 dBmV
Upstream channel ID = 1
Upstream channel frequency = 37584000 Hz
QoS max upstream bandwidth = 32000 bps
QoS max downstream bandwidth = 64000 bps
SigQu: Signal to Noise Ratio = 34.4 dB
Cable modem status = Operational
Upstream transmit signal power = 44.5 dBmV
Date and Time = 2003-06-21,09:45:01.0+00:00
Configuration filename = tera210x-copper.cm
(*) anyone know how I can get this swapped for a forward path attenuator, the one I have affects both directions?
Join CF
You are here: 
