How to enable - AHCI mode

[marek_max]

Hi,

I am going to buy a new motherboard & new Intel processor. I have a SSD drive and need to enable AHCI mode in the new motherboard, but cannot find this option in many motherboards' manuals (like Gigabyte GA-G41M-ES2H). Link to this manual:
http://download.gigabyte.asia/FileLi...41m-es2h_e.pdf

I am not sure, as the default mode on many motherboards is IDE, and SSD is much slower in this mode...


Any ideas?

Max

[damien c]

To enable AHCI mode in most board's you have to go in to the storage information, part of the bios and then change it there.

If it is a gigabyte board that you are getting maybe you could also ask on the gigabyte forum aswell.

[Delta Whiskey]

In my ASUS motherboard BIOS there is a SATA configuration option which is where you set IDE or ACHI. I can't see that option in the manual you refer to.

It will be easy enough to find once you have the system up and running

---------- Post added at 15:20 ---------- Previous post was at 15:17 ----------

It looks to me Gigabyte call it enhanced mode

Integrated peripherals on chip sata mode

[marek_max]

Originally Posted by zing

It will be easy enough to find once you have the system up and running

---------- Post added at 15:20 ---------- Previous post was at 15:17 ----------

It looks to me Gigabyte call it enhanced mode

Integrated peripherals on chip sata mode

Not sure if
enhanced mode = ahci

well its sata mode according to the manual so you assume its running to full sata spec

one way to find out is install a test OS win 7 for example in ide mode. The edit registry to enable ACHI then reboot and change to enhanced mode . If it boots bobs your uncle