Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | Does anyone know how to retrieve numbers from a dead mobile phone?

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > General Discussion > Lifestyle

Roof Insulation type.
Reply
 
Thread Tools
Old 27-03-2010, 08:52   #1
Quam256
Inactive
 
Join Date: May 2006
Services: XL,Phone and 60mb .
Posts: 903
Quam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of light
Roof Insulation type.

I have a roof of tiles(not slate) but no felt underneath.
I would like to be able to insulate between the rafters but dont know what type to go for as from what I have read the roof needs ventilation to stop any moisture getting trapped.The floor is already boarded and would like to be able to use the loft space.
Quam256 is offline   Reply With Quote
Advertisement
Old 27-03-2010, 11:48   #2
MovedGoalPosts
Inactive
 
MovedGoalPosts's Avatar
 
Join Date: Jun 2003
Location: 127.0.0.1
Age: 62
Posts: 15,868
MovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny stars
MovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny starsMovedGoalPosts has a pair of shiny stars
Re: Roof Insulation type.

Rigid Foam is the best type, common brand names include Kingspan, Celotex.

You need to be careful how you achieve this so you don't run the risk of timber decay. If the underside of your tiles has roofing felt you need a gap, at least 25mm between the felt and the insulation and that gap should be ventilated. Otherwise condensation will be a problem. Soem roofs I saw this winter that were unventilated but well insulated were litterally dripping with moisture from condensation.

In practical terms how you ventilate every space between the rafters is a challenge. Normally there should be a grille or gap at the eaves, or perhaps holes drilled into the soffits corresponding to the rafter spacing. That allows air to enter at the base, but you also need air to be able to exit high up at the ridge. Unfortunately that's the hard part and something I rarely see.

Of course if you don't have underfelt, then there is no problem as gaps in tiles will allow air to circulate. But you should still leave a gap between the insulation and tiles.

The manufacturer's will be able to tell you the total thicknes of insulation you need to get to modern standards. It can be quite a lot. You might need to do this as two layers. Some between rafters and some laid to the undersides.

You should fit a vapour check to the underside (roofspace side) of the installed insulation. This is usually a polythene sheet. That helps to reduce warm moist air moving to the colder space outside of insulation and agains reduces the risks of condensation. With the vapour check in place you can then fix your plasterboard or other linings. Some people will use foil backed plasterboard arguing the foil is a sufficient vapour check, but what about the board joints? OK so any vapour check is broken by nail fixings for the boards, hene check rather than barrier.

Make sure that your rafters are sturdy enough to take the additional wieght of the insulation and boarding. That does add up and most rafters will only have been sufficient for the roof covering. You might need additional prulins, struts and even collars to the roof structure and that might mess up your plans for a useable roof space.

You may have boarded out the loft as a floor, but was this just over the ceiling joists or was a proper new floor put in? Ceiling joists are unlikely to have sufficient strength for anything other than occasional maintenance and light storage use.
MovedGoalPosts is offline   Reply With Quote
Old 27-03-2010, 14:40   #3
Quam256
Inactive
 
Join Date: May 2006
Services: XL,Phone and 60mb .
Posts: 903
Quam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of lightQuam256 is a glorious beacon of light
Re: Roof Insulation type.

thanks for the replies,The loft is just used to store the odd thing ,I was looking at adding insulation under the tiles just as a extra layer of insulation to the house as it is a very large loft.
Quam256 is offline   Reply With Quote
Old 27-03-2010, 18:09   #4
Dai
Inactive
 
Join Date: Dec 2006
Location: Lincoln UK
Age: 78
Services: 50Mb, TV & Phone
Posts: 3,673
Dai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronze
Dai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronzeDai is cast in bronze
Send a message via MSN to Dai
Re: Roof Insulation type.

@Rob - Sincere thanks for that amazing level of detail. This is something I've also been considering as I've got a vast amount of space up there.

This will make it a lot easier to discuss with my potential builder and work out if *he* knows what he's doing..
Dai is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:52.


Server: lithium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum