Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | Remote Control Not Working - any ideas???

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > Virgin Media Services > Virgin Media TV Service

Splitting TV signal before decoder?
Reply
 
Thread Tools
Old 07-05-2005, 13:17   #1
Toutatis
Inactive
 
Join Date: May 2005
Posts: 1
Toutatis is an unknown quantity at this point
Question Splitting TV signal before decoder?

Heya,

Wondering if anyone can help with something I've been thinking about for a while?

I have NTL TV and currently have it setup in my lounge but would also like it in another room at the same time. I realise this is possible by splitting the signal after the decoder but you have to watch the same channel on both TVs. Hence I was therefore wondering if it was possible to split the signal before the decoder, buy another decoder and control and run them both seperatly?

If it is possible is the signal degredation too great, specially considering one of the TV's is two floors up? If so is it possible to boost the coded signal. I'm guessing not hence this thread is pointless

Thanks to anyone who replys!
Toutatis is offline   Reply With Quote
Advertisement
Old 07-05-2005, 13:53   #2
JohnHorb
Guest
 
Location: Sale, Cheshire
Services: 10MB Broadband, DTV, Telephone
Posts: n/a
Re: Splitting TV signal before decoder?

to the forum.

As far as I know (someone can probably confirm or deny), you can do this by renting a second STB (set-top box). You can't BUY decoders for NTL (at least not legally).
  Reply With Quote
Old 07-05-2005, 14:13   #3
Derek
Inactive
 
Derek's Avatar
 
Join Date: Jun 2003
Location: Glasgow
Services: SkyHD and Broadband
Posts: 9,158
Derek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny stars
Derek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny starsDerek has a pair of shiny stars
Re: Splitting TV signal before decoder?

Correct.

Depending on your area you may get channel 1-5 through the cable if you split it but this may cause problems with your existing channels and/or broadband.

The easiest option would be to get a digisender (and watch the same channels) or rent the second box (£15.00 per month on Digital, £7.00 (I think) on Analogue)
Derek is offline   Reply With Quote
Old 07-05-2005, 15:28   #4
paulyoung666
Permanently Banned
 
paulyoung666's Avatar
 
Join Date: Jun 2003
Location: norton , teesside
Age: 58
Posts: 10,571
paulyoung666 has a nice shiny star
paulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny starpaulyoung666 has a nice shiny star
Re: Splitting TV signal before decoder?

Quote:
Originally Posted by Toutatis
Heya,

Wondering if anyone can help with something I've been thinking about for a while?

I have NTL TV and currently have it setup in my lounge but would also like it in another room at the same time. I realise this is possible by splitting the signal after the decoder but you have to watch the same channel on both TVs. Hence I was therefore wondering if it was possible to split the signal before the decoder, buy another decoder and control and run them both seperatly?

If it is possible is the signal degredation too great, specially considering one of the TV's is two floors up? If so is it possible to boost the coded signal. I'm guessing not hence this thread is pointless

Thanks to anyone who replys!

hi and to the site , mesing about with the incoming cable is against t&c's and you may well end up with a bill to put it right if you cause a problem , hope you enjoy your stay here btw
paulyoung666 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:11.


Server: lithium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum