ELSA Lancom L-11 Wireless Access Point
02-08-2004, 10:53
|
#1
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
ELSA Lancom L-11 Wireless Access Point
Hi everyone,
I've been connected to NTL 600k for two years or so now, in general it's been pretty good.
About 6 months ago, I bought a new laptop with Wireless on board, and thought I'd get a Wireless PCMCIA for my old laptop (which originally setup NTL). Since then I have been using ICS to provide a wireless broadband connection in the house.
However, I now want to move my old laptop out of the room where the Cable Modem is, so I got hold of a Wireless Access point (ELSA Lancom L-11). With a firmware upgrade (supplied on CD), this supposedly allows it's wired Ethernet port to connect directly to a DSL Cable Modem. However, so far, I have had no luck whatsoever
Has anybody out there had any experience with the ELSA L-11? To be perfectly honest, I haven't got a clue where to start - and the manual with the Access Point is about as useful as a choco teapot...
Any help / suggestions would be gratefully accepted!
|
|
|
04-08-2004, 13:09
|
#2
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
Re: ELSA Lancom L-11 Wireless Access Point
Please? I'm desperate...
|
|
|
04-08-2004, 13:12
|
#3
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Ok....
Bear with me a few moments while I digest what you have written.
|
|
|
04-08-2004, 13:14
|
#4
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Quote:
|
Originally Posted by stigthew
Hi everyone,
I've been connected to NTL 600k for two years or so now, in general it's been pretty good.
|
That's nice.
Quote:
|
Originally Posted by stigthew
About 6 months ago, I bought a new laptop with Wireless on board, and thought I'd get a Wireless PCMCIA for my old laptop (which originally setup NTL). Since then I have been using ICS to provide a wireless broadband connection in the house.
|
So far so good then....
Quote:
|
Originally Posted by stigthew
However, I now want to move my old laptop out of the room where the Cable Modem is, so I got hold of a Wireless Access point (ELSA Lancom L-11). With a firmware upgrade (supplied on CD), this supposedly allows it's wired Ethernet port to connect directly to a DSL Cable Modem. However, so far, I have had no luck whatsoever 
|
You don't have a ' DSL cable modem'....
What have you actually done/tried?
Quote:
|
Originally Posted by stigthew
Has anybody out there had any experience with the ELSA L-11? To be perfectly honest, I haven't got a clue where to start - and the manual with the Access Point is about as useful as a choco teapot...
|
I have no experience with that hardware, but tell us a bit more about how everything is connected/set up-the more info the better.
Quote:
|
Originally Posted by stigthew
Any help / suggestions would be gratefully accepted!
|
The ball is rolling!
[Edit/Update]-The ELSA Lancom L-11 appears to be an access point with an integrated DSL router, & I think that is your problem.
What you (ideally) need is a standard wireless router-such as one of these: http://www.broadbandbuyer.co.uk/Shop...pID=38&Alt=Yes
That will connect to your modem, & will then pass the BB connection to your wireless laptop(s)
If you then need a wireless access point (WAP), then you need one of these: http://www.broadbandbuyer.co.uk/Shop...upID=8&Alt=Yes
HTH
|
|
|
04-08-2004, 13:26
|
#5
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
Re: ELSA Lancom L-11 Wireless Access Point
Thanks for hearing me, Neil...
I've got the standard NTL Ambit USB / Ethernet Cable Modem, which was previously connected to my WinXP Pro laptop via USB. This was the machine that I used to register with NTL way back in the mists of time, and everything has been peachy.
The Wireless Access Point has an Ethernet connection (to be expected), which, with aforementioned Firmware upgrade, *allegedly* connects to Ethernet-enabled Cable Modems.
The manual for the WAP rants on about supplying a service name / numbers, username, password etc. - but my understanding is that you don't need to *log in* to NTL per se. I've also read articles (on lesser sites ;-)) claiming that you need to 'spoof' the MAC address of the computer that originally registered with NTL, although I don't believe that this is possible with the ELSA device.
I can communicate with the ELSA over wireless, and get into configuration mode, and it seems to acknowledge that it is connected to something via the Ethernet port - it even appears to have two IP addresses, 10.0.0.1 and another starting with 169 (I'd love to tell you what it is exactly, but I'm at work and it's at home). However, I can get no further! Interesting to note that on the ELSA device, the 'LAN Collision' light is permanently on.
First thought - maybe it needs a crossover, rather than a *normal* cable? However, I would expect this to be documented in the manual (how dangerous assumptions are!). Other than that - clueless! I'm only a programmer... ;-)
|
|
|
04-08-2004, 13:29
|
#6
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
Re: ELSA Lancom L-11 Wireless Access Point
Thanks for the update - have to confess I don't understand the difference though - why would it cause me such grief?
|
|
|
04-08-2004, 13:31
|
#7
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Thing is-that Elsa device may have an ethernet port, but it is looking to "connect" as you say (like a DSL connection) as it has a DSL router built into it, when all you really need is a 54G wireless router (IMHO)
I still think your issue is wrong hardware m8, sorry.
|
|
|
04-08-2004, 13:33
|
#8
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Quote:
|
Originally Posted by stigthew
Thanks for the update - have to confess I don't understand the difference though - why would it cause me such grief?
|
Cable connections don't 'connect' per se (DSL asks you for a username/password when you connect as it is pretty much a glorified dial up connection), whereas your cable connection allows you in via your I.P/username/password, but not dialling in.
I hope that makes sense....
|
|
|
04-08-2004, 13:35
|
#9
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
Re: ELSA Lancom L-11 Wireless Access Point
In summary, then, it may work for an ADSL (BT-style connection), but it's an expensive (well, £25) doorstop where cable is concerned?
|
|
|
04-08-2004, 13:42
|
#10
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Quote:
|
Originally Posted by stigthew
In summary, then, it may work for an ADSL (BT-style connection), but it's an expensive (well, £25) doorstop where cable is concerned?
|
Pretty much I think.
My advice would be to get a decent wireless router. They are not that much more expensive, bit they are a lot more user friendly.
I've got a Belkin, but lots of peeps recommend Linksys & Netgear too.
HTH.
|
|
|
04-08-2004, 13:45
|
#11
|
|
Inactive
Join Date: Aug 2004
Posts: 6
|
Re: ELSA Lancom L-11 Wireless Access Point
What does that fella on 'The Fast Show' say? Oh yeah, that's it...bugger! ;-)
Neil, thanks very much for the guidance, I won't waste any more of my time trying to set it up and everyone else's time asking daft questions!
|
|
|
04-08-2004, 13:49
|
#12
|
|
Inactive
Join Date: Jun 2003
Posts: 6,058
|
Re: ELSA Lancom L-11 Wireless Access Point
Quote:
|
Originally Posted by stigthew
What does that fella on 'The Fast Show' say? Oh yeah, that's it...bugger! ;-)
Neil, thanks very much for the guidance, I won't waste any more of my time trying to set it up and everyone else's time asking daft questions!
|
No worries m8, that's what we're here for!
Like I said, get one of the wireless routers I linked to above, & you won't have any issues (+ there are loads of peeps on the site that are well clued up when it comes to wireless!  )
Just one thing-are the wireless cards in your laptop(s) 802.11 B, or 802.11 G? If they are B, then it may not be worth getting a G router, that's all.
Good luck, let us know how you get on.
|
|
|
04-08-2004, 14:11
|
#13
|
|
Inactive
Join Date: Jun 2003
Services: Cablevision
Posts: 8,305
|
Re: ELSA Lancom L-11 Wireless Access Point
But then the cost difference for g is minimal and this will future proof the purchase. a 11Mb BB connection is forseeable, this would make the wireless part the slowest link. A 54Mb BB connection is sufficiently far away that the hardware will have outlived is useful life.
|
|
|
04-08-2004, 14:16
|
#14
|
|
Inactive
Join Date: Oct 2003
Location: Bracknell
Age: 56
Services: NTL Telephone
3M Broadband - CM
Sky TV
Posts: 1,246
|
Re: ELSA Lancom L-11 Wireless Access Point
Quote:
|
Originally Posted by SMHarman
But then the cost difference for g is minimal and this will future proof the purchase. a 11Mb BB connection is forseeable, this would make the wireless part the slowest link. A 54Mb BB connection is sufficiently far away that the hardware will have outlived is useful life.
|
I would agree with that, I have a "G" router (Linksys WRT54G), but all my devices are "B".
As and when I upgrade kit, I will get "G" cards, and not have to replace my router.
I cannot forsee needing more than 54Mb connection for my wireless devices, and the wired are 100Mb switched, so no issues there either.
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 20:52.
|