Re: 1gig Rollout getting faster
Hello,
I'm trying to replicate the Mikrotik setup posted by rtho782, but I'm using a slightly different setup, as I do not have a 10GB LAN.
I'm using a hex-S, hoping this would work with the device.
I am trying to set up 2 bonded interfaces in a bridge as follows
Bridge Name: VMBridge containing:
Bonded interfaces:
1>AsusBond (ethernet ports: 2,3) 802.3ad
2> VMBBond (ethernet ports 4,5), balance-rr
However there seems to be no communication between the 2 bonded interfaces, they both show as connected, but I fail to see traffic pass through the bridge from 1-2 and vice versa.
The device plugged into ports 2,3 can't contact the device plugged into 4,5
ARP is disabled on the VMBond, as per the advice, but I cant get it to work, having left it for a good 15 minutes after rebooting all of the devices concerned.
Any help/pointers would be really useful. Thank you
MY Firewall detects the 802.3ad Link aggregation but it informs me the my ISP's DHCP isn't working, and I cannot see or get to the VM Hub 4 on 192.168.100.1.
Any help would be greatly appreciated.
My config is as per the attachments. I appreciate I may have done something wrong, I'm no Mikrotik expert, I'm new to their stuff, having come from a WatchGuard background for the last 5 years.
Thank you in advance.
Chris
Last edited by PixelGizmo; 26-05-2021 at 11:25.
|