[Zarf2007]

Ok as per rtho782's setup, I plan to adapt this to work with the following:

LAN <- Asus AX86u Wireless router's 2.5Gbps WAN port <- mikrotik switch 10Gbps copper SFP module - (supports 2.5Gbps and 5Gbps modes) / 2 x 1Gbps copper SFPs <- SHUB4.

I would then create the same bond group on the mikrotik for the two ports connecting to the SHUB4 and bridge that to the port with the 10Gbps SFP copper module), cat6 cables will be used for the connections between the AX86U, Mikrotik and SHUB4.

I should then be able to max out the bandwith using the 4 x 1Gbps LAN ports and WIFI6.

Total cost would be £220 for the mikrotik switch + network optics, £20 for cat6 cables and around £240 for the Asus Router (though I bagged it for £180 on Amazon recently so the prices fluctuate).

Hoping this works! will post back with results when I receive the equipment.