Quote:
Originally Posted by heero_yuy
Kinked / blocked waste pipe?
|
I did look and it appears that it does not kink as it flows out and the top of the machine stops it short of hitting the pipe pushed back. My old man said it might be flow and the stopping a time based error. Need to wait till it happens again now lol
---------- Post added at 19:55 ---------- Previous post was at 19:52 ----------
Quote:
Originally Posted by multiskilled
Is it plugged into the mains behind the machine if so check if the plug is pushed fully in or if the socket is dodgy try wiggling the plug and seeing if the machine cuts out.
The other thing it could be is syphoning. Is your drain hose pushed down a drain pipe or is connected to the plumbing under the sink? If the former check the hose isn't going right down to the bottom of the pipe. Pulling the machine out could be pulling the hose back up the pipe stopping it syphoning
also what is the model of the machine?
|
It does not switch off it errors
It fits behind in a pipe but there is a ring on the pipe stops it going to far ( I believe will check that)
Whirlpool zwf 14070w
