Hi,
I recently upgraded to the Tivo 6, which also meant swapping my SH for a V3 model.
Since the switchover, I find general browsing a bit 'off' (hard to explain, slight delay after clicking links, that sort of thing) and gaming definitely off with latency seemingly OK, but with momentary lag now and then.
Looking at the SH3 status, I see that I have 24 channels downstream and only one up. I'm sure I had at least 2 up before (could even have been more).
Here's my status readings. I've edited the headers to make them a little neater.
Does the below look OK?
Code:
Downstream bonded channels
Channel Frequency(Hz) Power (dBmV) SNR (dB) Modulation Channel ID
1 139000000 -4.2 36.3 256 qam 1
2 323000000 -1.7 38.9 256 qam 24
3 315000000 -1.7 38.9 256 qam 23
4 307000000 -1.7 38.9 256 qam 22
5 299000000 -2 37.6 256 qam 21
6 291000000 -2.7 38.6 256 qam 20
7 283000000 -2.7 38.6 256 qam 19
8 275000000 -2.7 38.6 256 qam 18
9 267000000 -2.7 38.6 256 qam 17
10 259000000 -3.2 37.6 256 qam 16
11 251000000 -3 37.6 256 qam 15
12 243000000 -3.2 37.6 256 qam 14
13 235000000 -3.5 37.6 256 qam 13
14 227000000 -3.5 37.6 256 qam 12
15 219000000 -3.5 37.6 256 qam 11
16 211000000 -3.7 37.3 256 qam 10
17 203000000 -3.7 37.6 256 qam 9
18 195000000 -3.7 37.3 256 qam 8
19 187000000 -3.5 37.3 256 qam 7
20 179000000 -3.5 37.3 256 qam 6
21 171000000 -3.4 37.3 256 qam 5
22 163000000 -3.5 37.6 256 qam 4
23 155000000 -3.5 37.3 256 qam 3
24 147000000 -4 36.3 256 qam 2
Code:
Upstream bonded channels
Ch ID Frequency(Hz) Mode dBmV Modulation Bandwidth(Hz) Symbol Rate (ksps)
2 39400000 ATDMA 49.5 16 qam 6400000 5120
*EDIT* I don't know if it's worth mentioning, but the downstream power does seem to fluctuate. It can change by up to 2.0 per channel, though it's usually around 0.5 on each channel.
Thanks for looking.