Cable Forum - View Single Post

tweetiepooh · 30-03-2020, 12:59

If you look up using routers as access points then the process is likely very similar if you can. The 2nd router then just becomes a client of the first and will route devices attached to it to the first.

In my case I put the WAN port of second router to a LAN port on the first and set the second to get it's IP via DHCP ( I then fix the IP for that device on the first outside the DHCP range).

30-03-2020, 12:59	#6
tweetiepooh Virgin Media Employee Join Date: Sep 2005 Location: Winchester Services: Staff MyRates BB: VM XXL TV: VM XL Phone : VM XL Posts: 3,117	Re: Different Subnet If you look up using routers as access points then the process is likely very similar if you can. The 2nd router then just becomes a client of the first and will route devices attached to it to the first. In my case I put the WAN port of second router to a LAN port on the first and set the second to get it's IP via DHCP ( I then fix the IP for that device on the first outside the DHCP range). __________________ I work for VMO2 but reply here in my own right. Any help or advice is made on a best-effort basis. No comments construe any obligation on VMO2 or its employees.