Quote:
|
Originally Posted by th'engineer
Could be the NIC am going to try that putting a separate one in the PCI slot. The software used is configured exactly as the old machine only difference being more RAM and faster processor on the new machine.
|
Famous last words
The only exactly the same config is a straight and direct disk mirroring.
Quote:
|
Will check its set to 10 base as said allreaady works no problems on my STB through my router.
|
Doesn't really prove that much besides that the network card in the PC can autonegotiate OK with your router - best to hard set to eliminate another part of the puzzle.
Did your PC perform OK on the STB? If not might be worth looking at, so long as you changed the cables along with trying your PC. Something else worth looking at.
Once PC, network card, cable, etc, have been eliminated then STB is most likely cause, bizarre that it should go wrong from having a different PC plugged into it + I'd be inclined to check the bit that changed lots before pointing finger at the bit that worked fine until this new piece of kit was added.