Cable Forum - View Single Post

Halcyon · 28-06-2006, 22:10

All you have to do is this:

1. Turn off everything, including your NTL modem.

2. Connect each of the PC's ethernet cable from their network card into the router.

3. Connect the routers Internet port to your NTL modem.

4. Switch on the cable modem and wait for lights to settle down.

5. Switch on router. Wait for lights to settle down.

6. Install the CD or whatever software came with your router if you have some. You will probably just have to go to the routers config page by typing it in to your Internet browser. Set up any security and access settings in there.

28-06-2006, 22:10	#4
Halcyon Hello ! Join Date: Mar 2004 Location: Somewhere Services: Sky, AppleTV, Netflix Posts: 16,777	Re: Installing Router 2moro All you have to do is this: 1. Turn off everything, including your NTL modem. 2. Connect each of the PC's ethernet cable from their network card into the router. 3. Connect the routers Internet port to your NTL modem. 4. Switch on the cable modem and wait for lights to settle down. 5. Switch on router. Wait for lights to settle down. 6. Install the CD or whatever software came with your router if you have some. You will probably just have to go to the routers config page by typing it in to your Internet browser. Set up any security and access settings in there. __________________ . -