Re: 10MB from newsgroups ... how ??
I use TweakNow PowerPack 2006 to tweak my settings to what they recomment for anything above 1.5MB lines my tcpwindowsize is 256960 and the large windowsupport is set, along with MTU AutoDiscovery is on with BlackHole Discovery is on
I tried CableNut with some settings I found for 10MB NTL recommended by others on this forum but if anything it made things slower
I'm currently with newsgroup-binaries, and pay $15 monthly for no restrictions at all for my downloads
Any suggestions on an EU newsgroup provider that offer unlimited download speeds with NO download limit, I don't mind paying for that, but not to much
Also how any advice on to set-up to use another port out to get access via another provider, if this might help as well
I've got 4 connections set on NewsLeecher, I'll try increasing it to the maximum 10, but anything more than 5 with AOL and it baulked connections constantly so leaving it at 4 ran fine, so I didn't know if that was the connection limit to the server or the limit with bandwidth I had
---------- Post added at 13:19 ---------- Previous post was at 13:17 ----------
Before I forget again, is there any website or free software that can trace the routes for me so I can see where the problems may be, and I'll compare them against the ftp.blueyonder.co.uk to see what the routes are
thanks
|