[robt]

Thanks for your prompt reply Aragorn. I've looked at Robin's page and cannot see any way to get an Event Log from the modem admin screen. Down the left hand side I get:

Configuration
Status
Operation Configuration

At the top I see four clickable items:

Cable Modem Information
Set Search Frequency Parameters
Set Ethernet Type
Change Username and Password

I've visited all these screens (and their sub-screens) and there's no logging option anywhere. (I also don't get the "Interface Rate" screen that he mentions.)

On the Configuration screen I get:

Type : Ambit ETH/USB Combo Cable Modem
Cable modem : Ambit Cable Modem
MAC address : xx:xx:xx:xx:xx:xx
IP address : yyy.yyy.yyy.yyy
Downstream Receive Power Level : 1.34 dBmv
Downstream SNR : 32.73 dB
Upstream Transmit Power Level : 42.00 dBmv

On "Operation Configuration" I get:

Network Access : Enabled
Maximum Downstream Data Rate : 2048000 bps
Maximum Upstream Data Rate : 200000 bps
Maximum Number of CPEs : 1
Software Upgrade File Name : ntlhm120_ntl0001.cpr
Software Upgrade AdminStatus : allowProvisioningUpgrade
Software Upgrade OperStatus : completeFromProvisioning

Cheers,

Rob