Cable Forum - View Single Post

greyripper · 17-04-2006, 09:03

Downstream power is -2.8dBmV, I did a refresh and it showed -3.1, refreshed again -2.9, refreshed again -2.8. So it is fluctuating.
Upsteam is 44.0dBmV - but I assume this is irrelevant as it is just the transmit power of the CM?

Full text of the downstream page:-
Downstream Lock : Locked
Downstream Channel Id : 40
Downstream Frequency : 402750000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 5056.941 Ksym/sec
Downstream Interleave Depth : taps32Increment4
Downstream Receive Power Level : -3.1 dBmV
Downstream SNR : 37.2 dB

---------- Post added at 08:03 ---------- Previous post was at 07:55 ----------

Just polling the downstream page (refreshsing). Power is varying between
-2.5 and -3.1. Is bigger better (is -3.1 better than -2.5?)

17-04-2006, 09:03	#5
greyripper Inactive Join Date: Apr 2006 Posts: 16	Re: Help with NTL CM Event log Downstream power is -2.8dBmV, I did a refresh and it showed -3.1, refreshed again -2.9, refreshed again -2.8. So it is fluctuating. Upsteam is 44.0dBmV - but I assume this is irrelevant as it is just the transmit power of the CM? Full text of the downstream page:- Downstream Lock : Locked Downstream Channel Id : 40 Downstream Frequency : 402750000 Hz Downstream Modulation : QAM64 Downstream Symbol Rate : 5056.941 Ksym/sec Downstream Interleave Depth : taps32Increment4 Downstream Receive Power Level : -3.1 dBmV Downstream SNR : 37.2 dB ---------- Post added at 08:03 ---------- Previous post was at 07:55 ---------- Just polling the downstream page (refreshsing). Power is varying between -2.5 and -3.1. Is bigger better (is -3.1 better than -2.5?)