Damn SWOOP that was fast lol.
Hold on ill do it now.
---------- Post added at 11:37 ---------- Previous post was at 11:32 ----------
OK here are the results with a normal connection type also 1 other thing the connection sped i cannot enter as im running NTL BB 10mb service and the little box doesn't allow for the correct value...
NORMAL CONNECTION TYPE:
1. Your Tweakable Settings:
Receive Window (RWIN):
65535
Window Scaling:
off
Path MTU Discovery:
ON
RFC1323 Window Scaling:
OFF
RFC1323 Time Stamping:
OFF
Selective Acks:
ON
MSS requested:
1460
TTL:
131
(less any hops behind firewall)
TTL remaining:
120
TOS/TOS subfield:
0
TOS/Flags:
2. Test 432701 byte download
Actual data bytes sent:
432701
Actual data packets:
298
Max packet sent (MTU):
1500
Max packet recd (MTU):
1500
Retransmitted data packets:
0
sacks you sent:
27
pushed data pkts:
44
data transmit time:
4.844 secs
our max idletime:
2068.9 ms
transfer rate:
80323 bytes/sec
transfer rate:
642 kbits/sec
This is
not a speed test!
transfer efficiency:
100%
3. ICMP (ping) check
Minimum ping:
86.63 ms
Maximum ping:
105.40 ms
Ping stability:
88.46 90.98 87.41 86.63 89.33 105.40 86.99 88.70 89.40 88.36
Notes and recommendations:
Input line speed for RWIN recommendation
Looking good
Notes and recommendations:
Good data stream (no/few rexmits)
2+ second stall detected (FAQ #
1606)
Notes and recommendations:
Looking good
Note i have set MTU at 1500 in my Netgear RP614 R.3 router and haven't started playing with DR TCP today and when i got fed up last night i reset all the DR TCP setting back to default...