Cable Forum - View Single Post

royaltiger · 20-11-2005, 11:45

You haven't really described your problem well, you say you are moving from usb to ethernet, so you had a connection with usb and all worked well. So you should then have to to reinstall broadband installer v2.o to reconfigure your computer to use ethernet, if you have done this did you pass all the configuration tests and did it tell you successfully installed etc, ie you setup your internet account again with ntl.Your network card at back off computer should have two small lights that flash when ethernet cable is plugged into network card that tells you connection is ok.If your network card is built into motherboard is it enabled in the bios setup

20-11-2005, 11:45	#6
royaltiger Inactive Join Date: Nov 2005 Services: 50mb Broadband Ambit VMNG300 modem, Tivo, V+TVDrive Extra Large and NTL phone, Virgin mobile Posts: 689	Re: Moving from USB to Ethernet You haven't really described your problem well, you say you are moving from usb to ethernet, so you had a connection with usb and all worked well. So you should then have to to reinstall broadband installer v2.o to reconfigure your computer to use ethernet, if you have done this did you pass all the configuration tests and did it tell you successfully installed etc, ie you setup your internet account again with ntl.Your network card at back off computer should have two small lights that flash when ethernet cable is plugged into network card that tells you connection is ok.If your network card is built into motherboard is it enabled in the bios setup