Cable Forum - View Single Post

Ignition · 11-11-2005, 15:58

There is a lot of difference between being the only modem connected to the CMTS / uBR and having to share that bandwidth with others, that's why in a lab a Terayon might be able to happily do 10Mbit+ however when having to filter out transmissions destined for other MAC addresses, having to handle small packets as well as large ones, etc, it's not really an option.

Can't remember if Terayons have a 100Mbit or 10Mbit ethernet port, however those getting close to the 10Mbit might want to check their ethernet settings, as the speeds described are approximately the maximum for a 10Mbit ethernet connection.

11-11-2005, 15:58	#162
Ignition Permanently Banned Join Date: Jun 2003 Location: South-East London Age: 48 Services: Depends who's being serviced :p Posts: 2,588	*Re: ALL* ntl 10MB Discussion (Part 3)** There is a lot of difference between being the only modem connected to the CMTS / uBR and having to share that bandwidth with others, that's why in a lab a Terayon might be able to happily do 10Mbit+ however when having to filter out transmissions destined for other MAC addresses, having to handle small packets as well as large ones, etc, it's not really an option. Can't remember if Terayons have a 100Mbit or 10Mbit ethernet port, however those getting close to the 10Mbit might want to check their ethernet settings, as the speeds described are approximately the maximum for a 10Mbit ethernet connection.