Cable Forum - View Single Post

basa · 12-08-2005, 12:16

Switch off PC, take out and re-insert data cable from Monitor to PC (check no bent pins) and screw retainers up lightly. Re-boot.

If no joy suspect the graphics card is badly seated, has lost power supply (small plug lead from card to motherboard) - (not all cards have separate power BTW) or card is US.

You could also re-install graphics card drivers just to be sure.

12-08-2005, 12:16	#2
basa Inactive Join Date: Jun 2003 Location: S Manchester Age: 78 Posts: 1,766	Re: Monitor problems... Switch off PC, take out and re-insert data cable from Monitor to PC (check no bent pins) and screw retainers up lightly. Re-boot. If no joy suspect the graphics card is badly seated, has lost power supply (small plug lead from card to motherboard) - (not all cards have separate power BTW) or card is US. You could also re-install graphics card drivers just to be sure.