Quote:
|
Originally Posted by zinglebarb
The ram is 133 but leave it as it is(reason for this is each up in the fsb will result in raising of fsb of the ram overclocking the ram can be avoided by starting it at 100 mhz).
Change the cpu to manual and up the fsb 5 ,reboot. If it runs up another 5 at this point stress test,I would use cpuz or prime95 for 15 mins should be enough,then if all is well and not to hot up it in steps .
If the machine refuses to boot just jumper the cmos and start again. this time up the vcore 1 step see how far it goes,I would have thought you would make 1gig but you never know how high it will go. Watch the temp very important this
|
the cpu is set at 100 so do i go for 105 or just go for it
only joking reebooting now
