Quote:
|
Originally Posted by BBKing
It's a transparent bridge, it's not in any way shape or form a router (it would have an IP address on its interfaces if it did, but it doesn't). It's a purely layer 2 device with a separate management IP address. It would have to be a layer 3 device to be considered a router in the classic sense. It doesn't route packets, it passes them.
|
Yeah, that is what i meant, i was using "router" in the loosest sense of the word (in that it sends packets from one interface to another)
Quote:
|
Originally Posted by BBKing
No he hasn't. Unless his place of work is the same as mine he won't be able to reach the 'external port', by which I assume you mean the cable modem's private management IP address. These addresses are non-routable across the public internet and thus by definition are not susceptible to an SNMP flood attack, unless someone in ntl with access to that particular network is doing it.
|
Hmm... this was quite a while ago, back when DocsDiag used to work... so I'm not sure how he managed it. It is possible he had SSH'd to one of his own boxes (on the customer side of the modem) and ran SNMP queries from there.
Quote:
|
Originally Posted by BBKing
Depending on where you live the Moto 4100 might or might not work - if you're in a EuroDOCSIS area it won't, it's only Ambits that work in those areas.
|
I live in Norwich.. so I don't know

I know there is a EuroDOCSIS version of the 4100 (the 4100E?) and I guess that would work?
Just out of interest, since as you work at NTL, if I lived in a suitable area and bought an SB4100, how would I go about using it ? Wouldn't you have to register it's CPE MAC address on your system in place of the Ambit's before I could use it? Would repeating the procedure with autoreg.autoregister.net work?
Quote:
|
Originally Posted by BBKing
eMule kills my ADSL modem/router sooner or later, so I'd suspect that - it shouldn't of course, but it evidently puts high demands on networking equipment.
|
I do actually have a Netgear wireless router, but I don't trust these things, and want more firewall control than standalone routers will give me, so i use FreeBSD 5.3 with dhclient and natd.