Quote:
|
Originally Posted by TheBlueRaja
.
.
.
Ideally if your AP had an ethernet port on the back of it you would just plug your switch into the AP and then run your PC2 off the switch. Your PC1 and PC2 should then get a private IP address from your AP vis DHCP on the AP and your AP should get the one NTL assigned IP address.
.
.
.
|
The AP does have an ethernet port which is how it is connected to the switch. Does this help me at all?
EDIT: the way I have it connected at the moment seems to be exactly what you are suggesting but I dont think the AP can be an upstream DHCP client and a downstream DHCP server at the same time.
SWW, thanks for the clarification on routers vs switches