Cable Forum - View Single Post

Aragorn · 12-05-2005, 17:43

Not seen the SIL controller myself, but afaik if it is working correctly you should see the BIOS report a single RAID disk on the SIL controller.

Then at the 'f6 prompt' with the correct drivers disk, WXP should load the drivers and report them on the list of loaded drivers before you hit 'enter' to continue.

Then when XP asks you which partition to use, there should only be one logical drive available.

At what point is your issue - BIOS, loading driver or no/multiple disks available?

12-05-2005, 17:43	#10
Aragorn Inactive Join Date: Apr 2004 Location: Minas Tirith, Gondor Age: 60 Posts: 3,458	Re: Help with raid 0 setup Not seen the SIL controller myself, but afaik if it is working correctly you should see the BIOS report a single RAID disk on the SIL controller. Then at the 'f6 prompt' with the correct drivers disk, WXP should load the drivers and report them on the list of loaded drivers before you hit 'enter' to continue. Then when XP asks you which partition to use, there should only be one logical drive available. At what point is your issue - BIOS, loading driver or no/multiple disks available?