Cable Forum - View Single Post - Cable Modem Setup Without the Broadjump CD !

Tezcatlipoca · 07-03-2005, 22:18

If you're using ethernet, then it isn't really much different.

Pretty much the same as in the first post, FWIR, but if you want to check your IP, use "winipcfg" (Start>Run>winipcfg) rather than ipconfig.

It really is quite simple.

More info at -

http://homepage.ntlworld.com/robin.d...p.html#without

then

http://homepage.ntlworld.com/robin.d.../basicset.html

then

the manual part here: http://homepage.ntlworld.com/robin.d...er.html#ntlreg

You just need to make sure your ethernet card has TCP/IP installed, & is set to obtain IP automatically. Power everything off, connect up, power up the modem & let it boot, power up the PC, then do the online registration.

07-03-2005, 22:18	#83
Tezcatlipoca Inactive Join Date: Jun 2003 Location: Cambridge Posts: 16,760	Re: Cable Modem Setup Without the Broadjump CD ! If you're using ethernet, then it isn't really much different. Pretty much the same as in the first post, FWIR, but if you want to check your IP, use "winipcfg" (Start>Run>winipcfg) rather than ipconfig. It really is quite simple. More info at - http://homepage.ntlworld.com/robin.d...p.html#without then http://homepage.ntlworld.com/robin.d.../basicset.html then the manual part here: http://homepage.ntlworld.com/robin.d...er.html#ntlreg You just need to make sure your ethernet card has TCP/IP installed, & is set to obtain IP automatically. Power everything off, connect up, power up the modem & let it boot, power up the PC, then do the online registration.