Cable Forum - View Single Post

altis · 06-01-2005, 11:46

If you can't get Aragorn's suggestion to work try this.

First, print out a copy of the instructions.

Then format a floppy disk but ensure the 'copy system files' box is ticked first. Then copy all the files contained in the zip onto it.

Leave the floppy in and reboot your system. If your BIOS is set to boot from floppy then it will, and you'll just see a DOS screen.

Then follow the instructions you printed out earlier.

Then remove the floppy and press ctrl-alt-del to reboot again.

06-01-2005, 11:46	#5
altis Inactive Join Date: Jun 2003 Location: Warrington ntl:81304 Altitude: 12m (and falling) Posts: 4,499	Re: Flashing NEC3500 firmware with new! If you can't get Aragorn's suggestion to work try this. First, print out a copy of the instructions. Then format a floppy disk but ensure the 'copy system files' box is ticked first. Then copy all the files contained in the zip onto it. Leave the floppy in and reboot your system. If your BIOS is set to boot from floppy then it will, and you'll just see a DOS screen. Then follow the instructions you printed out earlier. Then remove the floppy and press ctrl-alt-del to reboot again.