Thread: RF problem
View Single Post
Old 04-01-2005, 15:36   #16
Stu038
RIP
 
Stu038's Avatar
 
Join Date: Jun 2003
Location: Leicester
Posts: 818
Stu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful oneStu038 is the helpful one
Re: RF problem
Unfortunatly the Samsung STB comes without an internal Analogue bypass, one is however available and should be fitted if required on a STB swapout.

It is a silver block approx. 5cm square that fits onto the back of the STB where the cable coming from the wall is connected. Unfortunatly the RF gain is quite low from the STB and will be reduced further by installing the bypass.

If the bypasses wern't installed when the boxes were swapped out in these two cases I would suggest a polite phone call to faults requesting one.

hth
Stu038 is offline   Reply With Quote