[Broken Hope]

My Hub 5 is getting quite a lot of Post RS errors, they aren't climbing rapidly but they are going up, this is since I installed it on Tuesday.

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
1 331000000 7.8 40 QAM 256 25
2 139000000 7.6 40 QAM 256 1
3 147000000 7.5 40 QAM 256 2
4 155000000 7.5 40 QAM 256 3
5 163000000 7.4 40 QAM 256 4
6 171000000 7.4 40 QAM 256 5
7 179000000 7.4 40 QAM 256 6
8 187000000 7.4 40 QAM 256 7
9 195000000 7.6 40 QAM 256 8
10 203000000 7.5 40 QAM 256 9
11 211000000 7.7 40 QAM 256 10
12 219000000 7.6 40 QAM 256 11
13 227000000 7.5 40 QAM 256 12
14 235000000 7.4 40 QAM 256 13
15 243000000 7.4 40 QAM 256 14
16 251000000 7.2 40 QAM 256 15
17 259000000 7 40 QAM 256 16
18 267000000 6.8 40 QAM 256 17
19 275000000 6.5 40 QAM 256 18
20 283000000 5.8 39 QAM 256 19
21 291000000 7 40 QAM 256 20
22 299000000 7.9 40 QAM 256 21
23 307000000 8 40 QAM 256 22
24 315000000 7.8 40 QAM 256 23
25 323000000 7.7 40 QAM 256 24
26 339000000 7.9 40 QAM 256 26
27 347000000 8 40 QAM 256 27
28 355000000 7.9 40 QAM 256 28
29 363000000 8.1 40 QAM 256 29
30 371000000 8.1 40 QAM 256 30
31 379000000 8.2 40 QAM 256 31
Downstream bonded channels

Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors
1 Locked 40 0 1402
2 Locked 40 0 11
3 Locked 40 0 15
4 Locked 40 0 19
5 Locked 40 0 26
6 Locked 40 0 21
7 Locked 40 0 36
8 Locked 40 0 58
9 Locked 40 0 63
10 Locked 40 0 96
11 Locked 40 0 114
12 Locked 40 0 120
13 Locked 40 0 162
14 Locked 40 0 230
15 Locked 40 0 218
16 Locked 40 0 251
17 Locked 40 0 349
18 Locked 40 0 464
19 Locked 40 0 515
20 Locked 39 0 696
21 Locked 40 0 677
22 Locked 40 0 727
23 Locked 40 0 757
24 Locked 40 0 1017
25 Locked 40 0 1499
26 Locked 40 0 1535
27 Locked 40 0 1627
28 Locked 40 0 2356
29 Locked 40 0 2290
30 Locked 40 0 2860
31 Locked 40 0 3066

There doesn't seem to be any issues with my levels though as far as I know. So not sure why I'm getting Post RS errors, not sure if my hub 3 was getting them because it wasn't something I was checking.