Cable Forum - View Single Post

mmm · 20-09-2020, 12:43

old poster here, same old problem still. Local external box is a repeater coax fed varying signal levels particularly when the sun shines.

Getting frequent disconnects again. They do get into the Hub log (UTC timestamps)

Time Priority Description
20/09/2020 11:21:1 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0;
20/09/2020 11:21:1 critical SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0;
20/09/2020 11:20:1 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0;
20/09/2020 11:20:1 critical SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0;
20/09/2020 11:19:19 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0;

Why do these not register in the Tn counts?

Upstream bonded channels
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1 ATDMA 0 0 0 0
2 ATDMA 0 0 0 0
3 ATDMA 0 0 0 0
4 ATDMA 0 0 0 0

Is that why the auto tools always say nothing wrong, and I have to get a tech out, who checks everything and then says it is a networks problem who never fix it properly?

20-09-2020, 12:43	#1
mmm cf.geek Join Date: Jun 2003 Posts: 513	Hub3.0 Diags old poster here, same old problem still. Local external box is a repeater coax fed varying signal levels particularly when the sun shines. Getting frequent disconnects again. They do get into the Hub log (UTC timestamps) Time Priority Description 20/09/2020 11:21:1 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0; 20/09/2020 11:21:1 critical SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0; 20/09/2020 11:20:1 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0; 20/09/2020 11:20:1 critical SYNC Timing Synchronization failure - Loss of Sync;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0; 20/09/2020 11:19:19 Warning! RCS Partial Service;CM-MAC=c0:05:c2:03:35:9b;CMTS-MAC=00:01:5c:6c:8a:5b;CM-QOS=1.1;CM-VER=3.0; Why do these not register in the Tn counts? Upstream bonded channels Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts 1 ATDMA 0 0 0 0 2 ATDMA 0 0 0 0 3 ATDMA 0 0 0 0 4 ATDMA 0 0 0 0 Is that why the auto tools always say nothing wrong, and I have to get a tech out, who checks everything and then says it is a networks problem who never fix it properly?