My local utilisation must have increased randomly with me switching to static IP’s.
I’ve been running tests on and off all day and the upload has been fine, just ran one now (peak time) and bang it’s not very good at all.
Code:
Connecting to host host.com, port 5201
Reverse mode, remote host host.com is sending
[ 14] local XX.XX.XX.XX port 61984 connected to 213.XX.XX.XX port 5201
[ ID] Interval Transfer Bitrate
[ 14] 0.00-1.00 sec 879 KBytes 7.18 Mbits/sec
[ 14] 1.00-2.00 sec 766 KBytes 6.27 Mbits/sec
[ 14] 2.00-3.00 sec 442 KBytes 3.63 Mbits/sec
[ 14] 3.00-4.01 sec 289 KBytes 2.36 Mbits/sec
[ 14] 4.01-5.00 sec 143 KBytes 1.18 Mbits/sec
[ 14] 5.00-6.01 sec 72.3 KBytes 591 Kbits/sec
[ 14] 6.01-7.01 sec 63.1 KBytes 517 Kbits/sec
[ 14] 7.01-8.00 sec 122 KBytes 1.01 Mbits/sec
[ 14] 8.00-9.00 sec 125 KBytes 1.02 Mbits/sec
[ 14] 9.00-10.00 sec 163 KBytes 1.33 Mbits/sec
- - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 14] 0.00-10.09 sec 4.56 MBytes 3.79 Mbits/sec 12 sender
[ 14] 0.00-10.00 sec 2.99 MBytes 2.51 Mbits/sec receiver
iperf Done.