Cable Forum - View Single Post

Taf · 08-04-2019, 20:40

My bro's graphics card started smearing the screen, so he bought a Aorus Geforce GTX1060 6GB GDDDRS from Amazon..

I had to shoe-horn it in (very, very carefully). PCI3 power connected (6+2). Booted. Nowt.

It just hangs on the bios screen in both hmdi and DVI-D modes (at first the DVI-D lead would not go in fully as the "blade connector" had to force it's way through a badly moulded hole).

I suspected the maxiumum length card was pushing down on the mobo's SATA data leads for the SSD boot unit. So I cleared a bit of space by rerouting some fat cables to under the mobo.

Still nowt. And the PC self-reboots if turned off.

I refitted the old card, and all works apart from the smearing.

He has a Corsair 750w PSU that should handle it, but with 3 HD's, 2 DVD players, and SSD and a separte sound card, I think it might be hitting it's limits, causing the PSU to reduce a voltage.

But it's spec says "LED power indicators. Be alert when PCI-E voltage is unstable with the smart power LED indicators. When experiencing any power abnormality, the indicator will alert gamers by flashing light."

But those led's don't flash.

08-04-2019, 20:40	#1
Taf cf.mega poster Join Date: Jun 2003 Location: Kairdiff-by-the-sea Age: 69 Services: TVXL BBXL Superhub 2ac (wired) 1Tb Tivo Posts: 10,229	New graphics card.. no output. My bro's graphics card started smearing the screen, so he bought a Aorus Geforce GTX1060 6GB GDDDRS from Amazon.. I had to shoe-horn it in (very, very carefully). PCI3 power connected (6+2). Booted. Nowt. It just hangs on the bios screen in both hmdi and DVI-D modes (at first the DVI-D lead would not go in fully as the "blade connector" had to force it's way through a badly moulded hole). I suspected the maxiumum length card was pushing down on the mobo's SATA data leads for the SSD boot unit. So I cleared a bit of space by rerouting some fat cables to under the mobo. Still nowt. And the PC self-reboots if turned off. I refitted the old card, and all works apart from the smearing. He has a Corsair 750w PSU that should handle it, but with 3 HD's, 2 DVD players, and SSD and a separte sound card, I think it might be hitting it's limits, causing the PSU to reduce a voltage. But it's spec says "LED power indicators. Be alert when PCI-E voltage is unstable with the smart power LED indicators. When experiencing any power abnormality, the indicator will alert gamers by flashing light." But those led's don't flash.