Cable Forum - View Single Post

General Maximus · 28-05-2016, 17:12

it might be the same connector but the current/volts/wattage may be different. As an example, even though the psu's for the shubs will "connect" to any shub, they actually require their model specific psu. If you use a shub1 psu for a shub2 you'll break it.

Anyways, I think you are normally looking at 4 hours on average for a shub activation. You can tell when it is activated by looking at how many downstream channels it has locked on to. Atm it will only be 1 and it will change to 8 when everything is up and running.

28-05-2016, 17:12	#4
General Maximus cf.mega poster Join Date: Nov 2008 Location: Lincoln Services: phone + 1gbit BB + SkyQ Posts: 11,021	Re: Self install problem it might be the same connector but the current/volts/wattage may be different. As an example, even though the psu's for the shubs will "connect" to any shub, they actually require their model specific psu. If you use a shub1 psu for a shub2 you'll break it. Anyways, I think you are normally looking at 4 hours on average for a shub activation. You can tell when it is activated by looking at how many downstream channels it has locked on to. Atm it will only be 1 and it will change to 8 when everything is up and running.