[MUD_Wizard]

Originally Posted by Robertus

Every so many days I have to reboot our SHUB2AC to go back to near full speeds. We're in modem mode and this still happens. I speedtest at about 50mbit, reboot and go back to near full speeds. Any ideas?

50Mb suggests you only have one downstream channel locked? As 50Mb is the usable bandwidth of a single channel. Check your hub's downstream stats and the network log.

When you reboot it will reconnect to all the channels.

All superhubs do this as part of normal network operation when there are problems with the network channels:
http://volpefirm.com/docsis-3-0-partial-service/

Usually this happens in areas that are highly utilised by lots of users.


---------- Post added at 12:39 ---------- Previous post was at 12:33 ----------

Originally Posted by General Maximus

it is a known issues with the shub2ac (as it was with shub1) and it will take them a year or two to get fixed. If it is doing your head in I suggest you ring up and ask for a shub2 (which doesn't have the problem) and if you need wireless ac get a proper router and put the shub2 in modem mode.

Never had that problem with my SH1 or SH2ac (when I was on 150Mb). My SH2 behaved the same as my SH2ac.