Quote:
Originally Posted by nodrogd
I wouldnt touch a 27m run with a barge pole. It will cause serious disruption to the signal levels (would probably need a drop of one or even two taps in the local cabinet). The longest runs from VM cabinet amps are 200m max, so if you any distance away already this will be even more likely to cause issues.
|
25M of Webro HD100 (the correct cable to use) would only loose an extra 4-6db or so so IMHO the HD box can handle this unless the signal is very marginal to start with.
Salient part of datasheet below:
You can get a 25M length with 4 "F" connectors
here on Ebay for £25.49.
IF you get the cable try connecting the entire length into the box BEFORE you install it perminently. There's a status page in the tech part of the box setup where it shows you the signal strength, compare the before and after values. Someone with better tech knowledge than I can say what the worst case value is for the box to work reliably.
webro_HD100.JPG
__________________
History is much like an endless waltz: The three beats of war, peace and revolution continue on forever.
However history will change with my coronation - Mariemaia Khushrenada
