Cable Forum - View Single Post

Jong1 · 10-05-2015, 19:47

I wouldn't recommend having the LAN and WAN side of the Draytek on the same subnet. Maybe it might work, but it could also cause some even more weird problems down the line.

It's very odd that setting the SH2 to 192.168.2.1 and letting the SH2 assign an address for the Draytek doesn't work. ???. If 192.168.0.100 works it doesn't sound like it could be because you are not connected to the Virgin network, although I guess anything is possible. You didn't mess around with the subnet mask did you? Have you tried 192.168.1.1? If that doesn't work either I think it would be useful to have ALL the settings you have changed on the SH2. Maybe do a hard reset, then set it up, then grab screenshots of all the SH2 settings you have changed. I'll admit I've never tried to use any IP other than 192.168.0.1, but 192.168.x.1 should work.

10-05-2015, 19:47	#11
Jong1 Inactive Join Date: May 2011 Posts: 125	Re: How can I configure Shub2ac? I wouldn't recommend having the LAN and WAN side of the Draytek on the same subnet. Maybe it might work, but it could also cause some even more weird problems down the line. It's very odd that setting the SH2 to 192.168.2.1 and letting the SH2 assign an address for the Draytek doesn't work. ???. If 192.168.0.100 works it doesn't sound like it could be because you are not connected to the Virgin network, although I guess anything is possible. You didn't mess around with the subnet mask did you? Have you tried 192.168.1.1? If that doesn't work either I think it would be useful to have ALL the settings you have changed on the SH2. Maybe do a hard reset, then set it up, then grab screenshots of all the SH2 settings you have changed. I'll admit I've never tried to use any IP other than 192.168.0.1, but 192.168.x.1 should work.