Cable Forum - View Single Post - Is Virgin blocking remote access to my router

extender · 18-04-2015, 13:15

Hi.

I have a super hub and have it connected to a rt-n66u and running Asus merlin firmware, it is set so I can access router remotely as I am not residing at the address where my server and Internet are based, I keep losing access to the remote gui after some period of time and I have to ring the house and ask someone to reboot it. I have a openvpn server running well on it so I can safely see my server, when the gui becomes unresponsive I can still connect to the vpn and forwarded ports on the router for some time until eventually they fail...sometimes it comes back to life on its own accord but mostly I have to have it rebooted... I'm tearing my hair out with this as I did not have this problem with ddwrt but had wireless issues with it which is why I chose merlin. I have changed the ip from 192.168.1.1 to 192.168.11.1 and I have also enabled https ports but these lock out as well, I have a dyn.com pro account for ddns and when the gui is unresponsive remotely I have no issues accessing the gui locally ... any one else had these issues or have any idea where I should be looking. .

18-04-2015, 13:15	#1
extender Inactive Join Date: Apr 2007 Posts: 5	Is Virgin blocking remote access to my router Hi. I have a super hub and have it connected to a rt-n66u and running Asus merlin firmware, it is set so I can access router remotely as I am not residing at the address where my server and Internet are based, I keep losing access to the remote gui after some period of time and I have to ring the house and ask someone to reboot it. I have a openvpn server running well on it so I can safely see my server, when the gui becomes unresponsive I can still connect to the vpn and forwarded ports on the router for some time until eventually they fail...sometimes it comes back to life on its own accord but mostly I have to have it rebooted... I'm tearing my hair out with this as I did not have this problem with ddwrt but had wireless issues with it which is why I chose merlin. I have changed the ip from 192.168.1.1 to 192.168.11.1 and I have also enabled https ports but these lock out as well, I have a dyn.com pro account for ddns and when the gui is unresponsive remotely I have no issues accessing the gui locally ... any one else had these issues or have any idea where I should be looking. .