Quote:
Originally Posted by Sephiroth
Any neighbours! Reason I ask (not being at your house) is that either the problem is down to your specific connection, or the amplifier or an active component along the cascade is misbehaving.
Typical causes of your specific connection being bad might be:
- Water in your street tap point;
- Loose coax connections inside the house or in the outside Omnibox;
- Duff passive components at the street cabinet at your tap point;
- Duff Superhub
|
I've checked that the coax connections both inside and out are tight. They seem to be but doesn't mean there isn't anything wrong. I did wonder if it could be a duff Superhub, seems to have happened since getting the 2ac but it could just be coincidence. Plus the fact you can't see the pre or post RS errors on the Superhub 1 (as far as I'm aware). Other 2 I've no idea. Thing is neither of the 2 techs have actually physically checked anything. Just checked that the levels are ok, 1 with a meter, the other with a PDA. Typically both times they were, seems to be intermittent which I appreciate are always difficult to track down.