Thread: 50M Post RS Errors
View Single Post
Old 22-01-2015, 13:25   #15
Jon22
cf.addict
 
Join Date: Jul 2010
Location: Newport, Shropshire
Posts: 338
Jon22 is on a distinguished roadJon22 is on a distinguished road
Re: Post RS Errors

Technician came out a bit earlier and couldn't really find anything wrong. Took the 6dB attenuator off as said it wasn't needed. Checked everything was ok with a signal meter.

DS-1 DS-2 DS-3 DS-4 DS-5 DS-6 DS-7 DS-8
Frequency (Hz) 299000000 267000000 275000000 283000000 291000000 307000000 315000000 323000000
Lock Status(QAM Lock/FEC Sync/MPEG Lock) Locked Locked Locked Locked Locked Locked Locked Locked
Channel ID 5 1 2 3 4 6 7 8
Modulation 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM
Symbol Rate (Msym/sec) 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level (dBmV) 4.50 4.33 4.22 4.47 4.55 4.91 4.82 5.01
RxMER (dB) 34.63 34.63 34.48 34.48 34.63 34.77 34.77 34.63
Pre RS Errors 480 454 625 495 218 114 111 273
Post RS Errors 0 0 0 0 0 0 0 0

SNR has gone up a smidge with the attenuator off. He did suggest it could of just been down to an intermittent issue with SNR dropping briefly? Will keep an eye on it but pretty sure it'll be fine.

Just as an aside and it's something that has been mentioned on here, he did mention that the tiers are likely to be going 100, 200, 300Mb this year.
Jon22 is offline   Reply With Quote