[Jon22]

Was going to post back and say that everything was fine after reseating the coax cable and resetting the SH on Wednesday. Post RS errors stayed at 0 until Thursday morning. Gone back up into the thousands again now. Did have a brief loss of sync Thursday morning. Can't see anything obviously wrong other than 3 of the channels are a smidge below 34dB.

DS-1 DS-2 DS-3 DS-4 DS-5 DS-6 DS-7 DS-8
Frequency (Hz) 299000000 267000000 275000000 283000000 291000000 307000000 315000000 323000000
Lock Status(QAM Lock/FEC Sync/MPEG Lock) Locked Locked Locked Locked Locked Locked Locked Locked
Channel ID 5 1 2 3 4 6 7 8
Modulation 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM
Symbol Rate (Msym/sec) 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level (dBmV) -0.99 -1.52 -1.36 -1.11 -1.06 -0.83 -0.84 -0.78
RxMER (dB) 33.96 34.48 33.60 33.83 34.21 34.21 34.21 34.08
Pre RS Errors 325679 111039 783248 500481 134774 161912 171494 252541
Post RS Errors 16306 11872 16601 16775 16798 16723 16672 16579