Cable Forum - View Single Post

Musicman · 19-09-2014, 09:52

I currently have a SH1 which is proving unreliable in that the settings page (webserver) becomes unavailable after some days, though it still responds to pings and also though devices have a wireless connection, they cannot access the world wide web, though all internal devices are still accessible.

I have been requested to reset the modem to see if that makes a difference, but as I already had a network with quite a few static addresses on the 192.168.1.x range when the SH1 was supplied to me, I remember the pain of trying to assign the 192.168.1.x IP address range to the SH1 from whatever its default was.

My question is, if a do a factory reset and then restore the settings file, will the LAN IP address range change to my current setting of 192.168.1.x rather than the default. Hopefully someone will have tried this or something similar in the past and can advise.

Thanks

Gary

19-09-2014, 09:52	#1
Musicman cf.addict Join Date: Oct 2003 Location: St.Albans Services: Variable speed 10MB BB, Phone & Sky+ Posts: 120	Restoring SH1 setting I currently have a SH1 which is proving unreliable in that the settings page (webserver) becomes unavailable after some days, though it still responds to pings and also though devices have a wireless connection, they cannot access the world wide web, though all internal devices are still accessible. I have been requested to reset the modem to see if that makes a difference, but as I already had a network with quite a few static addresses on the 192.168.1.x range when the SH1 was supplied to me, I remember the pain of trying to assign the 192.168.1.x IP address range to the SH1 from whatever its default was. My question is, if a do a factory reset and then restore the settings file, will the LAN IP address range change to my current setting of 192.168.1.x rather than the default. Hopefully someone will have tried this or something similar in the past and can advise. Thanks Gary