Cable Forum - View Single Post - Superhub Modem Mode

Kushan · 08-10-2013, 21:01

Not come across that, but try this:

In modem mode (where you have the issue), remove the Coax cable and reboot the device. Leave coax cable removed.
Let it settle for about 5mins (watch the light sequence loop a few times).
Then, without rebooting or switching off the hub, screw the coax back in. Again leave it about 5mins, it should reconnect to the network (Light turns blue). See if that helps.

08-10-2013, 21:01	#2
Kushan cf.mega poster Join Date: Dec 2010 Location: Warrington Posts: 4,737	Re: Modem Mode - Can no longer detect WAN IP Not come across that, but try this: In modem mode (where you have the issue), remove the Coax cable and reboot the device. Leave coax cable removed. Let it settle for about 5mins (watch the light sequence loop a few times). Then, without rebooting or switching off the hub, screw the coax back in. Again leave it about 5mins, it should reconnect to the network (Light turns blue). See if that helps.