[jalzoo]

I have just plugged in an old Netgear WNR2000 only capable of 100meg but its all i have in terms of a router to test with SH2. And so far im seeing ALOT lower latency when compared to SH2 in router mode.

SH2 Router mode:

Pinging thinkbroadband.co.uk [80.249.99.130] with 32 bytes of data:
Reply from 80.249.99.130: bytes=32 time=16ms TTL=56
Reply from 80.249.99.130: bytes=32 time=18ms TTL=56
Reply from 80.249.99.130: bytes=32 time=22ms TTL=56
Reply from 80.249.99.130: bytes=32 time=17ms TTL=56

Crappy Netgear WNR2000:

Pinging thinkbroadband.co.uk [80.249.99.130] with 32 bytes of data:
Reply from 80.249.99.130: bytes=32 time=9ms TTL=56
Reply from 80.249.99.130: bytes=32 time=9ms TTL=56
Reply from 80.249.99.130: bytes=32 time=8ms TTL=56
Reply from 80.249.99.130: bytes=32 time=10ms TTL=56

Im limited to 94mb on that router due to the 100mbps port

So in a nut shell im actually quite annoyed that i now need to buy a router ontop of the £49 i just paid for the SH2

Will also setup a Thinkbroadband ping monitor over night and compare the two .

Got an Asus RT-N16 Coming on Tuesday with DD-WRT should run a treat, Not bad for £60.