Cable Forum - View Single Post - Superhub unable to access router after installing SuperHub as modem only

General Maximus · 15-11-2012, 19:19

I got half way through your post dude and stopped because you are getting yourself in a pickle. Playing around with the shub setting, assigning ips and putting stuff in the dmz is great when you are using the shub in router mode and want to connect additional routers, but you don't. All you needed to do is put the shub straight into mode and leave your Tp Link router as it was.

You are probably best off starting from scratch again and I would do a pin hold reset on both devices. Put the shub in modem mode and let it restart and its ip address will be 192.168.100.1. Connect the TP Link router to it without changing anything and I assume it will have a default ip of something like 192.168.0.1 which you can go in and change if you want to.

15-11-2012, 19:19	#2
General Maximus cf.mega poster Join Date: Nov 2008 Location: Lincoln Services: phone + 1gbit BB + SkyQ Posts: 11,021	Re: unable to access router after installing SuperHub as modem only I got half way through your post dude and stopped because you are getting yourself in a pickle. Playing around with the shub setting, assigning ips and putting stuff in the dmz is great when you are using the shub in router mode and want to connect additional routers, but you don't. All you needed to do is put the shub straight into mode and leave your Tp Link router as it was. You are probably best off starting from scratch again and I would do a pin hold reset on both devices. Put the shub in modem mode and let it restart and its ip address will be 192.168.100.1. Connect the TP Link router to it without changing anything and I assume it will have a default ip of something like 192.168.0.1 which you can go in and change if you want to.