Cable Forum - View Single Post

babis3g · 27-07-2012, 02:16

i can not help with belkin but here some basic

turn modem mode at SH
Take a cable cat5 or cat 5e and insert to lan 4 at SH(leave it at this port even if you turn router mode, back later)
other end connect it at wan port of the beklin
Take an other cat cable from lan 1 of the beklin to pc

turn SH & beklin & pc on after all cables are with this order

now open a window browser at and access the SH 192.168.100.1
Should see the SH status

open an other window in browser and type 192.168.2.1 (i think that is the one for beklin routers)...if is not the one then try the one that is by default
If you have change it in the past you may need to do factory reset

when you access beklin status (that where i don't know about beklin) you need set up (in mine i have it set it under static or dynamic ip) the correct settings

here is the manual for more help if you have lost it
http://www.belkin.com/uk/support/art...d=14380&scid=0
and also if you look around that beklin support link may have newest firmware for your router

If you can not access while is wired the 192....... of beklin or SH may need release / renew ip address at windows????

also more help here to set it as static ip or dynamic ( i have it as obtain ip automatic on mine)
http://www.belkin.com/support/articl...=1488&scid=221

So which stage are you facing the problem?

27-07-2012, 02:16	#5
babis3g Inactive Join Date: Mar 2012 Location: London Services: >100Mb<TV M+,TiVo 1T,V HD >Phone M Posts: 483	Re: Modem mode problem? i can not help with belkin but here some basic turn modem mode at SH Take a cable cat5 or cat 5e and insert to lan 4 at SH(leave it at this port even if you turn router mode, back later) other end connect it at wan port of the beklin Take an other cat cable from lan 1 of the beklin to pc turn SH & beklin & pc on after all cables are with this order now open a window browser at and access the SH 192.168.100.1 Should see the SH status open an other window in browser and type 192.168.2.1 (i think that is the one for beklin routers)...if is not the one then try the one that is by default If you have change it in the past you may need to do factory reset when you access beklin status (that where i don't know about beklin) you need set up (in mine i have it set it under static or dynamic ip) the correct settings here is the manual for more help if you have lost it http://www.belkin.com/uk/support/art...d=14380&scid=0 and also if you look around that beklin support link may have newest firmware for your router If you can not access while is wired the 192....... of beklin or SH may need release / renew ip address at windows???? also more help here to set it as static ip or dynamic ( i have it as obtain ip automatic on mine) http://www.belkin.com/support/articl...=1488&scid=221 So which stage are you facing the problem?