Cable Forum - View Single Post - TiVo 1 tivo box in 2 rooms

perkoperkins · 16-06-2012, 23:49

Hi I have managed to get tivo into a second room and controllable with the remote. (then send the signal to two other rooms with no loss in image or sound quality)

I have used the scart instead of hdmi. either way you'll need an infrared repeater ! i made one following this site ( if you have any electronics experience that is)

http://www.picprojects.org/projects/miniprojects.htm

scroll down to "IR Remote Control Repeater"

it cost me about a fiver to make, when i get 5 mins i will try and upload a picture of my system !

hope this helps

---------- Post added at 21:49 ---------- Previous post was at 21:44 ----------

just incase anyone does make the available circuit ,

The carrier frequency needs to be set to 40 Khz for the tivo remote to work ! ( jumper on the pcb is on )

16-06-2012, 23:49	#2
perkoperkins Inactive Join Date: Jun 2012 Posts: 1	Re: 1 tivo box in 2 rooms - with cables Hi I have managed to get tivo into a second room and controllable with the remote. (then send the signal to two other rooms with no loss in image or sound quality) I have used the scart instead of hdmi. either way you'll need an infrared repeater ! i made one following this site ( if you have any electronics experience that is) http://www.picprojects.org/projects/miniprojects.htm scroll down to "IR Remote Control Repeater" it cost me about a fiver to make, when i get 5 mins i will try and upload a picture of my system ! hope this helps ---------- Post added at 21:49 ---------- Previous post was at 21:44 ---------- just incase anyone does make the available circuit , The carrier frequency needs to be set to 40 Khz for the tivo remote to work ! ( jumper on the pcb is on )