Cable Forum - View Single Post

Alanmoss · 21-08-2011, 18:03

No, Because if you test between pin 1 and pin 1 and get continuity then test 1-2 , 1-3 , 1-4 and so on and get no continuity then the wire on pin 1 has no fault. Then carry out the same test on all the other wires, no faults found.

21-08-2011, 18:03	#6
Alanmoss Inactive Join Date: Aug 2011 Posts: 5	Re: HDMI Cable problem No, Because if you test between pin 1 and pin 1 and get continuity then test 1-2 , 1-3 , 1-4 and so on and get no continuity then the wire on pin 1 has no fault. Then carry out the same test on all the other wires, no faults found.