[QUOTE=richardc1983;35218097]
Quote:
Originally Posted by pythagoras
Dissapointing that there isnt one for Cambridge Audio.
|
Try this
Search for a code to control the volume on your AV/Stereo receiver
1. Cover the end of the TiVo remote control with your hand.
2. Hold down the TiVo and MUTE buttons simultaneously until the red (or amber) light on the remote control remains on.
3. Remove your hand from the end of the TiVo remote control.
4. Enter code 1999. After you enter the code, the red (or amber)light will flash three times and then remain on.
5. Press CHANNEL UP once every two seconds. This will test hundreds of codes, one by one.
IMPORTANT: Do not go any faster than this or you may skip over a code that works.
6. If you press CHANNEL UP and the volume on your AV/Stereo receiver becomes muted, press ENTER to select the code. Press VOLUME UP and then VOLUME DOWN to test the code. If the volume changes, you have successfully programmed the remote.
If you cycle through all the codes, the red LED will go off, indicating that you have tried all the codes. If this happens, or if you selected a code but the AV/Stereo receiver does not respond to the test, try again, to make sure you did not skip over your code by going too fast.
Regards
John