Cable Forum - View Single Post - V+ issue post 50Mb upgrade

jb66 · 14-11-2010, 10:38

Sounds like the OP has set the box to hdmi and then used the vcr socket. First of all make sure the box is actually plugged into the tv socket, then try the following:

Hold in the Stop and Play/Pause buttons on the front panel, and press Reset. Keep Stop and Play/Pause held in until the display says 'boot'. After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Sd', then press OK. Wait for the V+ to reboot then you should be back in SCART mode

14-11-2010, 10:38	#4
jb66 cf.mega poster Join Date: Aug 2009 Posts: 5,386	Re: V+ issue post 50Mb upgrade - no EPG etc. Sounds like the OP has set the box to hdmi and then used the vcr socket. First of all make sure the box is actually plugged into the tv socket, then try the following: Hold in the Stop and Play/Pause buttons on the front panel, and press Reset. Keep Stop and Play/Pause held in until the display says 'boot'. After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Sd', then press OK. Wait for the V+ to reboot then you should be back in SCART mode