Quote:
Originally Posted by jiffthejiffman
Hi guys,
I bought a second hand sky plus box the other day with a brand new dish.
I've got to set it up today and come up against a problem.
The dish is mounted at the same elevation and pretty much the same pitch as my next door nieghbours so I would have thought I'd recieve some signal no matter how small.
However, I get nothing. No signal or strengh and not locked.
I beleive the box is fine as it was shown to me working, and its turns on fine.
So I can only think its something to do with my set up. Spefically the fact I'm using only one cable rather than two.
I know its a Sky plus box, but as I'd have to pay to use the record faciality I thought I'd give that a miss, and assumed that the system would work with just one wire.
Is that not the case, do I have have to have two wire?
Or if it can be done with one wire, it is possibly my connection? Ie there four output on the dish and two inputs in the box (8 combinations) and I might be using the wrong ones.
Can anyone help me? I don't want to pay £60 for someone to come over and do a two minture job when its something I can do.
CCCChhhheeeerrrrssss guys.
|
did you use a signal meter ? having the dish looking like its at the same elevation as your neighbours is very different from its being the same, trying to install a dish without a meter is playing blind, you'l be lucky to get anything & yes you can install it with just one cable but as you said Sky+ wont work, well you would be able to record only one channel at a time but unless the receiver is left unplugged for at least three months from when the original subscription has ended all of the Sky+ features will be deactivated ie record, rewind etc as Sky send a signal to turn the futures off. the only way to get them reactivated is to get a subscription or to pay £10 a month for the Sky+ features.
---------- Post added at 19:05 ---------- Previous post was at 19:00 ----------
Quote:
Originally Posted by beeman
Well scince you already have a quad LNB then your best bet is just to pop down to to b&q and grab some satalite grade cable and wire up the second link yourself.
As for your origional question a sky+ box can work with just 1 input, however it dosnt generally like it and can cause issues like the one your receiving. Have you tried switching the cable between both the different sockets in the back of the sky+ box, you could also try a forced update of the box (i cant quite remember the presedure but a quick google will give you the information). However by far the best option is just to wire up the second input.
Even without the sky+ sub you can still use the record 1 watch 1 feature but i beleave you much use manual recording ruther then jusr pressing the record button.
|
wrong on both accounts read my above post.