Cable Forum - View Single Post - Dlink DIR-615 wireless connection

Peter_ · 27-11-2009, 10:04

All we do is get you to pinhole reset the router while powered on for 15 seconds.

Connect your laptop or PC into one of the blue ports and open a web page.

In the address bar you put 192.168.0.1 and press enter/return you will asked for a username which is admin and password which you leave blank and then you login.

You will be presented with a D Link page for the router.

On the left chose wireless setup then go to manual setup at the bottom.

Ignore the Pin section and go to the box with the SSID which by default will be dlink and change it to one of your choice.

Then choose your security option which should be the bottom one from the drop down WPA/WPA2 and the Network key box will appear and in here you put a password with a minimum length of 8 characters.

Then click save settings and wait for it to finish remove the ethernet cable and look for your newly named network and connect using your password.

You shoulod be connected and it should have taken between 5 and 10 minutes to achieve this and the disk will make a nice coaster.

27-11-2009, 10:04	#3
Peter_ Permanently Banned Join Date: Jan 2009 Location: In a world of no buffering!! Services: Samsung V+ XL TV XL Phone 30Mb Superhub Samsung Galaxy 3 32GB sd card In a world of no buffering! Posts: 20,915	Re: Dlink DIR-615 wireless connection All we do is get you to pinhole reset the router while powered on for 15 seconds. Connect your laptop or PC into one of the blue ports and open a web page. In the address bar you put 192.168.0.1 and press enter/return you will asked for a username which is admin and password which you leave blank and then you login. You will be presented with a D Link page for the router. On the left chose wireless setup then go to manual setup at the bottom. Ignore the Pin section and go to the box with the SSID which by default will be dlink and change it to one of your choice. Then choose your security option which should be the bottom one from the drop down WPA/WPA2 and the Network key box will appear and in here you put a password with a minimum length of 8 characters. Then click save settings and wait for it to finish remove the ethernet cable and look for your newly named network and connect using your password. You shoulod be connected and it should have taken between 5 and 10 minutes to achieve this and the disk will make a nice coaster.